Permian coal beds at 2400–2900 m depth in Cooper Basin, Australia have normal-incident reflection coefficient values as large as . If internal multiples are included in synthetic seismograms, excellent correlations exist between the synthetic seismogram and seismic, even when more than 50 coal beds are present. However, neither the synthetic seismogram nor the seismic tie the well-log lithologic boundaries because the incident wavefield that strikes a lithologic boundary and returns to the surface contains a signal wavelet followed by high-amplitude noise, which are interbed multiple reflections. Because the spectra of the signal and noise coda at a given two-way time normally do not overlap, time-varying Gaussian filters applied to the near-offset stack enhance the signal and suppress the noise coda. After filtering, the apparent time delay of reflections introduced by the coal beds is removed with variable time shifts (time compression), based on the estimated time-varying signal wavelets. The two-step process of low-pass filtering and compression yields seismic events that successfully tie the lithologic boundaries in the borehole, although with limited resolution. Our preliminary tests on a seismic line indicate that the horizon event associated with the base of a 500-m-thick coal sequence is more coherently imaged with our processing than with conventional processing.
- Received August 26, 2013.
- Revision received November 26, 2013.
- Accepted December 29, 2013.